Giant Knit Slouchy Beanie pt. 2!

When I made the tutorial for this giant slouchy beanie, I did it with two different colors of roving, but I really wanted try it in all white to see how it turned out. I used roving from Dharma Trading, which I am really surprised and delighted by, and my size 50 knitting needles. It took only a couple hours to finish, and I made it out on the balcony to photograph it just in time before it got dark.

And I really love how it turned out! It is super warm, very comfy, and quite cute. I'm always trying to be conscious of having cute winter gear, since it takes up such a large portion of my wardrobe. This fits the bill, I'd say!

I just love roving, and I don't think this affair is going to end any time soon, to be honest.

And yeah. I'm wearing this shirt for forever. Don't judge.

Tutorial for this hat is here, or you can buy the hat here. :)

Follow along:

                  
This post does contain some affiliate links. Thanks for your support!

Americana Plaid Flannel Archer Button Up

I'm going to be real with you, I 100% copied this shirt from Lauren of Lladybird. I saw her Archer in this fabric and I had to have it. This fabric is my PERFECT plaid flannel. It is 100% what I've always wanted out of a plaid: American colors, big and bold, predominantly red. It's so rustic, but still polished.

Because I am clearly obsessed, let's talk about the fabric first. It is a Kauffman Mammoth flannel, ordered from Fabric.com. It's double napped, which means it has been brushed on both sides, so it is extra warm. Make no mistake, this also means it is very susceptible to shrinkage! Flannel tends to shrink more than other fabrics, something I know well from my job, since I work in men's lounge wear -- lots of flannel pajama pants. I always pre-wash my fabrics, usually in a more extreme manner than I will be caring for the garment, and I was slightly worried when I only pre-washed this once. So I was really, really fearful when I threw this in the washer for the first time as a full garment. What if I totally ruined my brand new shirt?! Here's the wonderful news: IT DIDN'T SHRINK. I hung it to dry, but since shrinkage happens in the washing cycle too, I don't credit this to the fact that I air-dried it. This fabric. Is awesome. Who wants to hand-wash a button-down? Super stoked.

The pattern is the Archer Button Up from Grainline Studios. This is the 3rd shirt I've made using this pattern (this was the first, this was the second), but I don't think I've quite corrected the fit yet. Overall I am pleased with how the body fits, but I think the sleeves are slightly bigger than I would like, especially through the forearm. I'm thinking I might try closing the pleats next time?

I actually finished this a few weeks ago, just in time for a trip to Baltimore to visit a friend. I definitely was rushing to get it done in time to take it with, and stayed up until 1am the night of my 6am flight to set the buttonholes. I haven't done that nonsense since college! But it was worth it! Because I was going the weekend of the Jonas blizzard, our travel plans got moved around and we went to Philadelphia airport first, and then took the train up to Baltimore. I hadn't gotten a chance to sew on the buttons but I was totally wearing the shirt open over a t-shirt anyway. So on the train, I pulled it off, got out my thread and buttons, and started sewing away. Definitely got some funny looks from my seat-mate!

I'm glad I pushed so hard to finish it, too, because when we were snowed in that weekend, I wanted nothing more than to wear this cozy thing! 

While I was careful to plaid-match at CF and at the side seams, I did not at all plan the matching from sleeves to body. Accidents that look time-consuming? Yes, please!

One other thing I did differently from last time was to change up the placket from the continuously bound one that comes with the pattern. Instead, I followed this tutorial from Off the Cuff. While I am pretty pleased with the results, I think this method might not be a good fit for fabric this bulky, because there isn't a way to trim the excess from the bottom of the placket, and there is quite a bit of fabric tucked under from making the point. I also think I made my placket a little too long, but since I wear my shirtsleeves rolled up 90% of the time anyway, it doesn't matter!

The back yoke, pocket, and front placket were all cut on the bias. All seams are flat-felled, which I love, because it makes the shirt feel like it could last a lifetime. But... maybe not at the rate that I've been wearing this. No biggie, I already ordered more Kaufman Flannel (different colorways) for more Archer shirts. Not even sorry.

Follow along:

                  

This post does contain some affiliate links. Thanks for your support!

Finished Project: Camilla Babe Sweater

It took me about four months longer than it should have, but I finally finished this little sweater for my niece! I started it way back in August, shortly after she was born, and knit the bulk of it on a series of plane rides from North Carolina to Alaska. I didn't quite finish it during my visit up there, and after I got home, it fell the the side. All I had left to do was sew the underarm seams and weave in the ends, and it sat for months in that state! How silly! 

Luckily, I made a six-month size and it turned out big anyway, so it is still going to fit her. This is the Camilla Babe pattern from Quince & Co, and I've always thought it was just the sweetest little pattern. It is knit bottom up, seamless, so it's really comfortable for a little one to wear (presumably). It was for the most part a breeze to knit, but because I had never knit a sweater bottom-up before, I did have a hard time wrapping my head around the joining of the sleeves to the body. Once my knitting buddy from work explained that it was like three tubes joining together to become one tube, it clicked for me. Funny how we get tripped up on these little things, isn't it?

I used some amazingly soft merino superwash DK weight, which I actually went in on with my aforementioned knitting buddy, and I can't remember the site we got it from. But it was like $3/skein, so I bought a LOT... and then went on a yarn diet for an extended period of time. Speaking of, I should really do that again. It's great for stash busting!

One more project off the needles. I can't wait to see my niece wear it when I visit Alaska in April! Ravelry link is here!

Tutorial: How to Knit a Slouchy Beanie with Colorblocking - Roving

Apologies for the unintentional hiatus! January got away from me, in a good kind of way. I finished up a few projects (including this shirt! I'll post it soon!), traveled to Baltimore during their big blizzard, and got a new cat (!). Happy February!

This is a tutorial for a chunky knit roving hat with colorblocking. It is super simple and fast and fun! I also cannot decide if I even like the hat or not, haha! I ran out of the blue, and I think I would like it more if it had more than a smidge of blue at the end. But you know, you win some and you lose some.

Because this is hat is knit with roving, the first thing you'll need to do is make your yarn! You can do this following my instructions in my previous tutorial, for the giant knit cowl. You will need to divide and set a slight twist into the roving to create your yarn:

You can learn the details of that technique HERE!

Okay, so for this project, you'll need about 100 grams of roving, or two skeins of Knitpick's roving.  You can really use any roving that's combed into a long strand. Here I used some creamy white roving, and some beautiful sapphire blue Knitpick's Wool of the Andes roving, left over from other projects. You can adjust your colorblocking to be any length, or you can skip it altogether! 

You will also need size 50 (25 mm) circular knitting needles. I like these ones from Knitter's Pride. 

With you main color, start by casting on 16 stitches, using the long-tail cast-on method.

Join in the round.

Begin to knit 1x1 rib.

Splice your yarn as necessary!

Watch it (quickly!) grow...

Knit in rib for 8 rounds (or desired amount). Switch to your second color:

Proceed in 1x1 rib for two more rounds.

On round 11, k2tog 8 times. 8 sts remaining.

Pull your loose end through the 8 remaining stitches.

Pull tightly, tie a knot, and weave in all loose ends.

How easy was that?! Even with spinning the roving, this can easily be done in a couple hours! It is one-size-fits-most, and you can easily increase or decrease as needed. For reference, I have a 22 1/2" head circumference (pretty standard).

This is so easily customizable, and I think would look really cute with different amounts of colorblocking, or stripes, or no colorblocking! You do you!

Here is the Ravelry link - add me, heart it up, all of that good stuff. I would love to see photos if you make this! Thanks for reading through!